Pipelines plants development with associated isometrics and supports.
Compression Skid gas.
Development of pipelines, isometrics, foundations, MTO, carpentry and metal structures.
TCS staff created and coordinated the design of a biomass plant (15 MW) in collaboration with AET supplier of the boiler. The design includes civil works, mechanical and electrical works.
TCS staff participated to the design and implementation of an energy power plant (about 2 MW) with heat recovery from the gases emitted from a sludge incinerator (2010).
Drawings for facility expansion, carpentry and piping.
Dynamic FEM calculation for investigation on recurring breaking causes of a rail car component.
Pipelines development.
TCS staff has participated in the design of the 400 tpd line of Villa Poma, the two Lonigo lines (an oven with a head burners and the other with transverse burners).
In more recent years (2014/15) TCS realized the design of systems related to the furnace cooling circuits and compressors (7 bar) with Verallia Company.
TCS staff participated to the supervision of the electrical and fluid engineering part of the float line in Colombia.
TCS staff participated to the design of both float lines, in relation to the basic engineering, for the Manfredonia line (1999) and the complete design of utilities, electrical and control of “San Giorgio di Nogaro” line (2010). It included the assembly oversight and the commissioning direction.
Since the late 80s through 90s TCS staff has had an ongoing relationship with the International Technical Directorate of Paris (Auberviller) for the design and implementation of all Float lines both new and revamping realized in that period.
Piping plant, construction isometrics, materials list and supports.
TCS staff was a manager at a large italian multinational cement producer for technical direction.
Engineering for wastewater sludge treatment.
Leonardo project: loop diagram (Intools).
San Carlo: wagon’s load automation.
Electrical systems engineering for rolling mills and hot dip galvanizing.
Pipe plants, supports and isometric drawings.
Pipe plants design, supports and isometric drawings for incinerator plants at Casal borsetti (RA), Granarolo (BO) and Lecco.
Piping layout and supports.
Water treatment, compressor room.
PDMS modeling.
Water treatment plant with piping development, isometrics, supports and relative material lists.
Water treatment, compressor room, laboratory, external distribution, fire prevention system.
PDMS modeling.
Caesar II piping stress analysis.
Piping plant development and isometrics for the hydroelectric plant in cave.
Basic and detailed engineering (multidisciplinary: mechanical plant, electro-instrumental and control system).
Turbogas (Gas Turbines + Electric Generator)
Turbo compression (Gas Turbines + centrifugal compressors)
Steam turbines
Compressors
Turbo-expander
Skid gas treatment
Gas-tight panels.
Field instrumentation design on the Hot End for Oven revamping (Empoli 2014).
Audits, design and realization of shop drawings of boiler (pressure vessels, columns, heat exchangers, etc.).
© 2016 Tecnocadservice.com | All rights reserved. Other company names and product names appearing in this site are the registered trademarks or trademarks of their respective companies.
Tecno Cad Service Engineering S.n.c. - Via Del Polo Tecnologico, 10 - 57023 Cecina (LI) Italy - tel: 0586 630128 fax: 0586 632761 - VAT 01139810491
